Search

Blog Archive

What is the difficulty level? How is it calculated?

As the name suggests, it refers to the difficulty of clearing a stage in Shisen-Sho.
The easier stages will be easy to solve, while the more difficult ones will likely leave you in stuck. However, what determines this is a difficult question. It is not hard to imagine that human tendencies, such as optical illusions and assumptions, also greatly affect the level of difficulty. Normally, the difficulty level should be judged by a human player and based on the ” flavor” of the stage, but this is not the case with auto-generated stages.

In Simple Shisen-Sho, the difficulty of a stage is roughly defined as follows.

High Difficulty ≈ The ratio of steps that can be solved without getting stuck is low among all the combinations of steps to remove the tiles.

However, although it is called simple, it is not easy to perform the above calculation. The number of steps to remove tiles in a given stage is astronomically large, and it is impossible to list all of them with the capabilities of today’s PCs and tablets.

Therefore, Simple Shisen-Sho uses an approximate method to quickly calculate the ratio of stages that can be solved, and estimates the difficulty level. To put it simply, we solve a stage thousands of times in different steps, count the number of times it is solved and the number of times it gets stuck, and calculate the ratio. The approximate calculation of the estimated difficulty may fluctuate due to changes in computer load and other factors. In other words, the difficulty judged by PC1 and the difficulty judged by PC2 may be slightly different.

There are seven difficulty levels: Very Easy, Easy, Normal, Difficult, Very Difficult, Ultra Difficult, and Ultimate. The breakdown of each category is undisclosed, but the percentage of the stages that can be solved is almost 100% for Very Easy and close to 0% for Ultimate.

As you might imagine, there is a strong correlation between stage size and difficulty. Smaller stages tend to be easier, and larger stages tend to be more difficult. In 14×6 stege, you will rarely find a stage that is more difficult than “Ultra Difficult”; it is rare to find one in tens of thousands of stages. On the other hand, there are only a few percent of 17×8 stages that are “Very Easy”. Thus, depending on the combination of stage size and difficulty, it may take some time to find a stage with the desired difficulty level when you start playing, so you may not be able to select it.

Wiimote pairing fails

Check the pairing compatibility of the Bluetooth adapter and the Wiimote.

  1. Open the “Devices and Printers” screen in the “Control Panel”.
    (To open: “Start” -> “Windows System” ->  “Control Panel” ->  “Hardware and Sound” ->  “Devices and Printers”)
  2. Press “Add a device” at the top, and then press the Sync button on the Wiimote.
  3. When the wiimote appears in the list of dialogs, select it and then press “Next”.
  4. Leave the passcode blank and press “Next”.
  5. Wait for the driver installation to complete.

If pairing is not successful using this method, you will not be able to use the Wiimote Checker in your current Bluetooth environment.

Change the Bluetooth adapter settings or change the Bluetooth adapter.

Why does app need strong permissions?

This is because, due to Microsoft’s restrictions, we’ll inevitably need “all” permissions to control the Wiimote using the standard Windows 10 drivers.

Is there a free trial ?

Yes, there is. Please download it at following URL.

https://www.microsoft.com/store/apps/9P58V4XTD41X

牌がタッチしづらいです

「設定」画面で、「牌選択補正」を変更してみて下さい。

「弱」「中」「強」のタッチ補正で、快適にプレイできると思います。

  • 「弱」… 牌のすぐ近くの空白をミスタッチした場合に補正します。
  • 「中」… 牌のすぐ近くの空白をミスタッチした場合に強く補正します。牌選択時、ペア消去牌の近くをミスタッチした場合に補正します。
  • 「強」… 補正「中」の効果に加え、ペア消去牌の補正を、選択牌にも遡って適用します。(牌選択操作がロックタイプでは使用できません)

タイムアタック派の作者のお薦めは「中」です。

また、合わせて牌選択操作の変更もお好みでどうぞ。

  • 「移動する」… 選択牌が次々移動します。選択状態を解除する事はできません。タイムアタック重視の方にお薦めです。
  • 「ロックする」… 選択牌がロックされます。選択を解除するには同じ牌を再度選択します。勝率重視の方にお薦めです。